Introduction to Bitumen Supply in Brazil
We operate in a highly competitive and strategically vital sector where bitumen supply in Brazil plays a central role in infrastructure, road construction, and industrial development. As demand continues to grow across public and private sectors, selecting a reliable bitumen supplier in Brazil becomes critical for ensuring project durability, cost efficiency, and compliance with international standards.
We position ourselves as a trusted authority in this field, offering not only premium-grade products but also unmatched logistical capabilities and customer-focused service. Our approach sets a benchmark for excellence in the Brazilian bitumen market.
Understanding Bitumen and Its Industrial Importance
Bitumen, also known as asphalt, is a highly viscous, black, and sticky petroleum-based material widely used in:
- Road construction and paving
- Waterproofing systems
- Industrial coatings
- Airport runways and highways
We ensure that every batch of bitumen supplied meets strict quality control standards, delivering consistent performance across diverse environmental conditions found in Brazil—from tropical humidity to high-traffic urban zones.
Why Brazil is a Key Market for Bitumen Supply
Brazil’s expanding infrastructure demands continuous investment in high-performance construction materials. We recognize that:
- The country’s vast road network requires ongoing maintenance and expansion
- Urbanization drives demand for durable paving solutions
- Government initiatives prioritize infrastructure modernization
We align our supply chain to support these demands, ensuring fast delivery, scalable supply volumes, and technical support for projects of all sizes.
Steel Drum Specifications – 185 KG
| Item | Value |
|---|---|
| Plate Thickness (Body) | 0.6 ± 0.02 mm |
| Plate Thickness (Top & Bottom) | 0.6 ± 0.02 mm |
| Height | 100 ± 2 cm |
| Diameter | 50 ± 2 cm |
| Lid Hole Position | Center |
| Lid Hole Diameter | 10 ± 1 cm |
| Body Corrugations | 16 |
| Net Filling Capacity | 182 ± 3 kg |
| Gross Weight | 192 ± 3 kg |
| Drum Tare Weight | 9.5 ± 1 kg (inclusive of lid cap) |
| Color | Glossy Black |
| Workmanship | Drums supplied shall be of good workmanship and sufficiently leak-proof when filled with hot bitumen |
| Material | DIN 1623 ST12 new cold-rolled A-grade steel |
Analysis and Specifications of Available Bitumen Grades
Bitumen 60/70 – Specification
| Property | Test Method | Unit | Specification |
|---|---|---|---|
| Specific Gravity @ 25°C | ASTM D70 | kg/cm³ | 1.01 – 1.06 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 60 – 70 |
| Softening Point | ASTM D36 | °C | 49 – 56 |
| Ductility @ 25°C | ASTM D113 | cm | 100 min |
| Loss on Heating (wt %) | ASTM D6 | wt % | 0.2 max |
| Drop in Penetration after Heating | ASTM D5–D6 | % | 20 max |
| Flash Point | ASTM D92 | °C | 232 min |
| Solubility in Trichloroethylene | ASTM D2042 | wt % | 99 min |
| Spot Test | AASHTO T102 | — | Negative |
Bitumen 80/100– Specification
Standard: ASTM D946 & D3381
Laboratory Environmental Conditions:
Humidity: 38 %
Temperature: 25 °C
| Analysis | Unit | Limit | Test Method | Result |
|---|---|---|---|---|
| Density @ 25 °C | kg/m³ | — | ASTM D70 | 1.022 |
| Penetration @ 25 °C (100 g, 5 s) | 0.1 mm | 80–100 | ASTM D5 | 95 |
| Softening Point | °C | Min 42 | ASTM D36 | 47 |
| Flash Point (Cleveland Open Cup) | °C | Min 232 | ASTM D92 | 318 |
| Ductility @ 25 °C (5 cm/min) | cm | Min 100 | ASTM D113 | >100 |
| Solubility in Trichloroethylene | wt % | Min 99 | ASTM D2042 | 99.99 |
| Viscosity @ 135 °C | cSt | Min 250 | ASTM D2170 | 276 |
| Viscosity @ 60 °C | Pa·s | 100 ± 20 | ASTM D2171 | 105 |
| Spot Test | — | Negative | AASHTO T102 | Negative |
Thin Film Oven Test (TFOT) – 163 °C, 5 h
| Analysis | Unit | Limit | Test Method | Result |
|---|---|---|---|---|
| Loss on Heating | wt % | Max 0.5 | ASTM D6 | 0.05 |
| Drop in Penetration after TFOT | % | Max 20 | ASTM D6–D5 | 4.5 |
| Ductility @ 25 °C after TFOT (5 cm/min) | cm | Min 75 | ASTM D113 | >75 |
Bitumen 40/50– Specification
Standard: ASTM D946 & D3381
Laboratory Environmental Conditions:
Humidity: 38 %
Temperature: 25 °C
| Analysis | Unit | Limit | Test Method | Result |
|---|---|---|---|---|
| Density @ 25 °C | kg/m³ | — | ASTM D70 | 1.036 |
| Penetration @ 25 °C (100 g, 5 s) | 0.1 mm | 40–50 | ASTM D5 | 43 |
| Softening Point | °C | Min 49 | ASTM D36 | 51.3 |
| Flash Point (Cleveland Open Cup) | °C | Min 230 | ASTM D92 | 320 |
| Ductility @ 25 °C (5 cm/min) | cm | Min 100 | ASTM D113 | >100 |
| Solubility in Trichloroethylene | wt % | Min 99 | ASTM D2042 | 99.9 |
| Kinematic Viscosity @ 135 °C | cSt | — | ASTM D2170 | 475 |
| Spot Test | — | Negative | AASHTO T102 | Negative |
Thin Film Oven Test (TFOT) – 163 °C, 5 h
| Analysis | Unit | Limit | Test Method | Result |
|---|---|---|---|---|
| Change in Mass | wt % | Max 0.8 | ASTM D1754 | 0.041 |
| Retained Penetration after TFOT | % | Min 55 | ASTM D5 | 61 |
| Ductility @ 25 °C after TFOT (5 cm/min) | cm | Min 50 | ASTM D113 | 84 |
MC Cutback Bitumen – Medium Curing
| Characteristic | Unit | MC30 | MC70 | MC250 | MC3000 | Test Method |
|---|---|---|---|---|---|---|
| Kinematic Viscosity at 60°C | cSt | 30–60 | 70–140 | 250–500 | 3000–6000 | ASTM D2170 |
| Flash Point | °C | 38 | 38 | 66 | 66 | ASTM D3143 |
| Water Content (Max) | % Vol | 0.2 | 0.2 | 0.2 | 0.2 | ASTM D95 |
Distillate to 360°C
| Distillation Temperature (°C) | Unit | MC30 | MC70 | MC250 | MC3000 | Test Method |
|---|---|---|---|---|---|---|
| 225 | % Vol | 10 | 10 | 10 | 10 | ASTM D402 |
| 260 | % Vol | 40–70 | 25–65 | 15–55 | 15–75 | ASTM D402 |
| 315 | % Vol | 75–93 | 75–87 | 60–87 | ≥80 | ASTM D402 |
| Residue from distillation to 360 | % Vol | 50 | 55 | 67 | 67 | ASTM D402 |
Tests on Residue Bitumen from Distillation
| Characteristic | Unit | MC30 | MC70 | MC250 | MC3000 | Test Method |
|---|---|---|---|---|---|---|
| Penetration @ 25°C | 0.1 mm | 120–150 | 120–150 | 120–150 | 120–150 | ASTM D5 |
| Ductility at 25°C | cm | 100 | 100 | 100 | 100 | ASTM D113 |
| Solubility in TCE | % wt | 99 | 99 | 99 | 99 | ASTM D2040 |
RC Cutback Bitumen – Rapid Curing
| Characteristic | Unit | RC30 | RC70 | RC250 | RC3000 | Test Method |
|---|---|---|---|---|---|---|
| Kinematic Viscosity at 60°C | cSt | 30–60 | 70–140 | 250–500 | 3000–6000 | ASTM D2170 |
| Flash Point | °C | — | — | 27 | 27 | ASTM D3143 |
| Water Content (Max) | % Vol | 0.2 | 0.2 | 0.2 | 0.2 | ASTM D95 |
Distillate to 360°C
| Distillation Temperature (°C) | Unit | RC30 | RC70 | RC250 | RC3000 | Test Method |
|---|---|---|---|---|---|---|
| 225 | % Vol | 55 | 50 | 35 | 10 | ASTM D402 |
| 260 | % Vol | 75 | 70 | 60 | 25 | ASTM D402 |
| 315 | % Vol | 90 | 85 | 80 | 70 | ASTM D402 |
| Residue from distillation to 360 | % Vol | 50 | 55 | 65 | 75 | ASTM D402 |
Tests on Residue Bitumen from Distillation
| Characteristic | Unit | RC30 | RC70 | RC250 | RC3000 | Test Method |
|---|---|---|---|---|---|---|
| Penetration @ 25°C | 0.1 mm | 80–120 | 80–120 | 80–120 | 80–120 | ASTM D5 |
| Ductility at 25°C | cm | 100 | 100 | 100 | 100 | ASTM D113 |
| Solubility in TCE | % wt | 99 | 99 | 99 | 99 | ASTM D2040 |
Bitumen 200/300– Specification
| No. | Property | Unit | Test Method | Result |
|---|---|---|---|---|
| 1 | Penetration | dmm | ASTM D6 | 220 |
| 2 | Kinematic Viscosity at 135°C | °C | ASTM D445 | 200 |
| 3 | Softening Point | °C | ASTM D70 | 37 |
| 4 | Flash Point | °C | ASTM D92 | 215 |
| 5 | Sulphur | Mass % | ASTM D4294 | 5.9 |
Bitumen 100/200– Specification
| No. | Property | Unit | Test Method | Result |
|---|---|---|---|---|
| 1 | Penetration | dmm | ASTM D6 | 110 |
| 2 | Kinematic Viscosity at 135°C | °C | ASTM D445 | 250 |
| 3 | Softening Point | °C | ASTM D70 | 40 |
| 4 | Flash Point | °C | ASTM D92 | 260 |
| 5 | Sulphur | Mass % | ASTM D4294 | 5.9 |
Guaranty and safety of bitumen penetration 60/70
Persa Company: A Trusted Supplier of Bitumen in Brazil
We have established Persa Company as a leading supplier of bitumen in Brazil, built on a foundation of reliability, product excellence, and long-term partnerships.
Key Strengths of Persa Company
- Consistent Product Quality
We deliver bitumen that meets international ASTM and EN standards, ensuring durability and performance. - Strategic Logistics Network
We operate with efficient import, storage, and distribution systems, allowing us to serve clients across Brazil without delays. - Customized Supply Solutions
We tailor our offerings to match specific project requirements, including different bitumen grades and packaging formats. - Competitive Pricing Structure
We provide cost-effective solutions without compromising on quality.
Types of Bitumen Supplied by Persa Company
We supply a comprehensive range of bitumen products designed for various industrial and construction needs:
Penetration Grade Bitumen
We offer grades such as 60/70 and 80/100, ideal for road construction due to their balance of hardness and flexibility.
Performance Grade Bitumen (PG)
We supply advanced formulations engineered for specific climate conditions, ensuring long-term pavement performance.
Oxidized Bitumen
We provide oxidized or blown bitumen used in waterproofing, roofing, and insulation applications.
Polymer Modified Bitumen (PMB)
We deliver enhanced bitumen solutions with improved elasticity and resistance, suitable for high-traffic areas and extreme weather conditions.
Advanced Supply Chain and Distribution Excellence
We manage a robust logistics infrastructure designed to meet Brazil’s geographic challenges. Our operations include:
- Bulk shipment handling via ports
- Storage terminals with temperature control systems
- Flexible transportation options including tanker trucks and drums
We ensure timely delivery and maintain product integrity throughout the supply chain, minimizing risks and maximizing efficiency.
Quality Assurance and Compliance Standards
We prioritize strict quality assurance protocols at every stage:
- Laboratory testing for viscosity, penetration, and softening point
- Compliance with international quality certifications
- Continuous monitoring of production and delivery processes
We guarantee that our bitumen consistently meets engineering specifications and regulatory requirements.
Applications of Bitumen in Brazil’s Infrastructure
We support a wide range of infrastructure projects across Brazil:
Road Construction
We supply materials for highways, urban roads, and rural access routes, ensuring long-lasting surfaces and reduced maintenance costs.
Airport Infrastructure
We provide high-performance bitumen suitable for runways and taxiways, designed to withstand heavy loads and temperature variations.
Waterproofing Systems
We deliver specialized bitumen for roofing membranes, foundations, and industrial waterproofing.
Industrial Applications
We support industries requiring coating, sealing, and insulation solutions.
Sustainability and Environmental Responsibility
We integrate sustainable practices into our operations by:
- Promoting energy-efficient production processes
- Supporting recycling of asphalt materials
- Reducing emissions through optimized logistics
We contribute to a greener construction industry while maintaining high-performance standards.
Why Choose Persa Company as Your Bitumen Supplier in Brazil
We differentiate ourselves through:
- Reliability: Consistent supply even during high-demand periods
- Expertise: Deep knowledge of the Brazilian market and infrastructure needs
- Flexibility: Customized solutions tailored to project requirements
- Support: Dedicated technical and customer service teams
We build long-term partnerships based on trust, performance, and value.
Future of Bitumen Supply in Brazil
We anticipate continued growth in Brazil’s infrastructure sector, driven by:
- Increased investment in transportation networks
- Expansion of urban development projects
- Adoption of advanced construction technologies
We remain committed to innovation, quality, and scalability, ensuring we meet future demands with precision and reliability.
Conclusion: Leading the Bitumen Supply Industry
We stand at the forefront of the bitumen supply industry in Brazil, delivering unmatched quality, efficiency, and service. Our commitment to excellence positions Persa Company as the preferred partner for infrastructure and industrial projects nationwide.
We continue to raise the standard, ensuring every client benefits from superior materials, dependable logistics, and expert support.
Office Tel / fax : +971 45525 037
Whatsapp and direct mobile: +971523717966